Skip links

10/100/1000BaseT/TX to 1000BaseLX Media Converter, SC/SM, 20 km Span (065-1196ALXED)

The Signamax 10/100/1000 to 1000 SX/LX Switching Media Converters provide an intelligent solution for long distance connections between legacy 10BaseT and 100BaseTX networks and 1000Base Gigabit Ethernet networks. The built-in switch enables the fiber cable connection to operate at 1000 Mbps connected to either a 10BaseT, 100BaseTX, or a 1000BaseT network, while remaining completely 1000BaseSX or 1000BaseLX standard-compliant for the fiber optic connection. The fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex legacy hub.

Improvements in the this series of media converters include: extremely low latency, the ability to force the RJ-45 port to 100Base or 10Base full or half-duplex modes, provide auto-negotiation on the 1000Base fiber port or forced full-duplex mode where required, and the enabling or disabling of the Link Fault Signaling feature.

Application Reference: Security Camera Network, Extended Over Fiber (PDF 477 Kb) Revised 07-27-2016

 

Description

  • Extremely low latency supports larger multi-hop networks
  • Extremely high reliability; MTBF of over 112 years
  • Gigabit transmission supports 9K bytes jumbo frames
  • IEEE 802.3x flow control for full duplex and back pressure for half duplex supported
  • DIP switch configuration for link fault signalling, fiber auto/force mode, and SFP speed
  • Full wire-speed forwarding rate
  • Supports wall mounting, DIN-rail mounting or use with media converter rack mount chassis

 

APPLICABLE STANDARDS

IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000BaseSX
IEEE 802.3z 1000BaseLX
IEEE 802.3x Flow Control

  • PORTS

1 – RJ-45 10/100/10000BaseT/TX port.
1 -1000BaseSX or 1000BaseLX fiber optic port.

  • LED STATUS INDICATORS

Per Unit: Power; LFS Status; Full Duplex
Per RJ-45 Port: Link Copper; Copper port speed (Green = 1000 Mbps, Amber = 100 Mbps, off = 10 Mbps)
Per Fiber Port: Link Fiber

  • PERFORMANCE

Latency: ≤1.5 μs (FIFO).
MTBF: 985,339.89 hours (112.48 years), calculated via the Part Stress Analysis Method.
Throughput, per port: @ 1000Base: 1,488,100 pps (64-byte packets); @ 100Base: 148,810 pps (64-byte packets)
Switch Fabric Speed: 4.0 Gbps (non-blocking, wire speed performance)
Frame Buffer: 12K total
Jumbo Frame Support: 9K packets supported

  • DIP SWITCH SETTINGS
 No. Down Up Notes
 1 Disable LFS Enable LFS LFS: Link Fault Signaling function
 2 Enable Auto-Negotiation for TX port Enable Force mode for TX port
 3 TX port Force mode: Full-duplex TX port Force mode: Half-duplex
 4 TX port Force mode: 100 Mbps TX port Force mode: 10 Mbps
 5  Function reserved Function reserved
 6 Function reserved Function reserved

 

  • FIBER INTERFACE

Type:
P/Ns 065-1196A/1196AED: Laser Diode
P/Ns 065-1196ALX/1196ALXED: MQW Laser
Wavelength:
P/N 065-1196A: 850 nm nominal (830 nm max.,860 nm min.)
P/N 065-1196AED: 1310 nm nominal (1270 nm max.,1355 nm min.)
P/N 065-1196ALX: 1300 nm nominal (1270 nm max.,1355 nm min.)
P/N 065-1196ALXED: 1300 nm nominal (1261 nm max.,1360 nm min.)
Max Output Power:
P/N 065-1196A: -4.0 dBm
P/N 065-1196AED: 0.0 dBm
P/Ns 065-1196ALX/1196ALXED: -3.0 dBm
Min Output Power:
P/N 065-1196A: -9.5 dBm
P/N 065-1196AED: -6.0 dBm
P/N 065-1196ALX: -11.0 dBm
P/N 065-1196ALXED: -8.0 dBm
Sensitivity:
P/N 065-1196A: -13.5 dBm
P/N 065-1196AED: -17.0 dBm
P/Ns 065-1196ALX/1196ALXED: -22.0 dBm
Max Input Power:
P/N 065-1196A: -13.5 dBm
P/N 065-1196AED: 0.0 dBm
P/Ns 065-1196ALX/1196ALXED: -3.0 dBm
Link Power Budget:
P/N 065-1196A: 4.0 dB
P/N 065-1196AED/ 1196ALX: 11.0 dB
P/N 065-1196ALXED: 14.0 dB

  • ELECTRICAL CHARACTERISTICS

12 V DC. External 100 – 240 V AC 50/60 Hz. Power supply included.

  • ENVIRONMENTAL REQUIREMENTS

Operating Temperature: 32°F to 122°F (0°C to 50°C)
Storage Temperature: -14°F to 158°F (-10°C to 70°C)
Relative Humidity: 5% to 95% (non-condensing)

  • PHYSICAL CHARACTERISTICS

Dimensions: 4.33” L x 3.16” W x 0.91” H (109.2 mm x 83 mm x 23.8 mm)
Weight: 0.33 lb (150 g)

  • CERTIFICATIONS

CE, FCC, ROHS, VCCI Class A

  • WARRANTY

Limited Lifetime

 

Download Specifications (PDF 358 KB) Revised 03-2016

Download User’s Guide (PDF 189 KB) Revised 01-2014

Download Rev2 Quick Start Guide (PDF 281KB) Revised 01-2023

 

Part NumberDescription
065-1196A10/100/1000BaseT/TX to 1000BaseSX Media Converter, SC/MM 220 m Span on 62.5 μm Fiber / 550 m Span on 50 μm Fiber
065-1196AED10/100/1000BaseT/TX to 1000BaseSX Media Converter, SC/MM 2 km Span on 62.5 μm or 50 μm Fiber
065-1196ALX10/100/1000BaseT/TX to 1000BaseLX Media Converter, SC/SM, 10 km Span
065-1196ALXED10/100/1000BaseT/TX to 1000BaseLX Media Converter, SC/SM, 20 km Span

 

Mounting Options

Part NumberDescription
AM10010DIN-Rail Mounting for 065-11xx Series and 065-1696SFPDR Media Converters
065-118516-Bay Rack Mount Media Converter Chassis, AC

 

 

 

This website uses cookies to improve your web experience.
Home
Account
Cart
Search